Loading SEN workspace
Preparing the latest information…
Enterprise technology · Energy · Medical · Global sourcingChina → Bangladesh → Worldwide
Select an image, then move the pointer over the large image to inspect details. Tap the large image to toggle zoom on touch devices.
Chinese
EPON OLT PX20++++ SFP Optical Transceiver Module – 1.25G/1.25G, 1490nm TX / 1310nm RX, +10dBm, 20KM SC
EPON OLT PX20++++ SFP Optical Transceiver Module featuring 1.25Gbps TX / 1.25Gbps RX, 1490nm transmit / 1310nm receive wavelengths, +10dBm transmit-power marking, 20KM rated reach and a single SC optical interface. Designed for compatible EPON/GEPON OLT equipment in FTTH, ISP and telecom fiber-access networks.
Stock: 32SKU: SEN-CHINESE-EPON-OLT-PX20-SFPModel: EPON OLT PX20++++ SFP
BDT 2,900BDT 3,000
Final pricing may vary by configuration, quantity, delivery and project requirements.
Connected infrastructure engineered for speed and resilience.
Product overview
EPON OLT PX20++++ 1.25G SFP Optical Transceiver – +10dBm 20KM
The EPON OLT PX20++++ is a high-power SFP optical transceiver module designed for compatible EPON Optical Line Terminal (OLT) equipment. The photographed module is clearly labeled EPON-OLT-PX20++++ and is intended for FTTH, FTTB, ISP and telecom Passive Optical Network deployments.
The module provides symmetrical 1.25Gbps TX / 1.25Gbps RX operation over a single optical fiber. On the OLT side it transmits downstream at 1490nm and receives upstream optical signals at 1310nm.
Key Specifications
| Product Type | EPON OLT Optical Transceiver Module |
| Label / Model | EPON-OLT-PX20++++ |
| PON Technology | EPON / GEPON |
| Form Factor | SFP |
| Transmit Data Rate | 1.25Gbps |
| Receive Data Rate | 1.25Gbps |
| Transmit Wavelength | 1490nm |
| Receive Wavelength | 1310nm |
| Rated Distance | 20KM |
| Optical Connector | SC |
| Transmit Power Marking | +10dBm |
| Transmission Type | Single-Fiber Bidirectional |
| Fiber Type | Single-Mode Fiber |
| Application | EPON OLT / FTTH Access Network |
High-Power PX20++++ Optical Module
The module is marked +10dBm optical transmit power. High-power EPON OLT modules are intended for optical distribution networks where a larger optical power budget may be required.
The PX20++++ designation is used commercially for enhanced/high-power PX20 OLT modules. Exact optical power limits and receiver sensitivity can vary between manufacturers, so network design should use the specifications of the actual module rather than relying only on the number of “+” symbols.
1490nm TX / 1310nm RX
The module uses wavelength-division operation over a single fiber. The OLT transmits downstream traffic at 1490nm and receives the ONU/ONT upstream signal at 1310nm.
20KM EPON Access
The product label specifies a rated distance of 20KM. Actual achievable reach depends on the complete optical distribution network, including fiber attenuation, splitter loss, connector loss, splice loss and ONU/ONT optical characteristics.
Typical Applications
- EPON / GEPON Optical Line Terminals
- FTTH – Fiber to the Home
- FTTB – Fiber to the Building
- ISP Fiber Access Networks
- Telecommunication Networks
- Passive Optical Networks
- Fiber Broadband Distribution
- High Optical-Budget EPON Deployments
Important Compatibility Information
This is an EPON OLT optical module, not a standard Ethernet SFP and not a GPON OLT module. Compatibility must be verified with the exact OLT chassis, PON service board, firmware and required optical specifications before installation.