Loading SEN workspace
Preparing the latest information…
Preparing the latest information…
Select an image, then move the pointer over the large image to inspect details. Tap the large image to toggle zoom on touch devices.
Micron
Micron MT29F2G08ABAEA 2Gb (256MB) SLC NAND Flash memory IC featuring an x8 parallel NAND interface and TSOP-48 surface-mount package. Designed for non-volatile firmware and data storage in networking equipment, embedded systems, industrial electronics, communication equipment, and electronic repair applications.
Final pricing may vary by configuration, quantity, delivery and project requirements.
The Micron MT29F2G08ABAEA is a 2-gigabit SLC NAND Flash memory device designed for reliable non-volatile data storage in embedded systems, industrial electronics, networking equipment, communication devices, control boards, and other electronic applications.
With a total storage density of 2Gb, equivalent to approximately 256MB, the device uses an x8 parallel NAND interface and retains stored information when electrical power is removed.
The device provides 2 gigabits of raw NAND Flash storage capacity. This corresponds to approximately 256 megabytes and is suitable for firmware, boot code, embedded operating systems, configuration data, and other non-volatile storage requirements.
The MT29F2G08ABAEA uses Single-Level Cell (SLC) NAND Flash technology. SLC stores one data bit per memory cell and is commonly selected for applications requiring robust write endurance, reliability, and predictable performance.
The device uses an 8-bit parallel NAND data interface. Dedicated control signals are used for command, address, read, write, chip-enable, ready/busy, and write-protection operations.
As a NAND Flash device, stored information is retained without continuous electrical power. This makes the IC suitable for firmware storage, embedded system boot memory, equipment configuration, and persistent application data.
The device shown uses the traditional thin small-outline package commonly associated with parallel NAND Flash devices. The package provides gull-wing leads for PCB mounting and is suitable for replacement and repair of compatible electronic assemblies.